|Ismerje meg, hogyan tudja beállítani és használni a legkorszerűbb mobil, VoIP, SMS és web funkciókat.|
The Ozeki VoIP GSM Gateway and Ozeki NG SMS Gateway connection enables you to send text messages via SIP or dial voice calls on telephone lines and play voice messages. Follow these steps below and create successful and seamless connection.
1. What you need
In order to send or receive SMS messages from your IT system, you need to connect the Ozeki NG SMS Gateway and Ozeki VoIP GSM Gateway together. In addition you need to insert a SIM card into the Ozeki VoIP GSM Gateway. In the Figure 1 you can see the accessories:
Figure 1 - SIM Card, Ozeki VoIP GSM Gateway and Ozeki NG SMS Gateway
2. Opening the box
After you have got the Ozeki VoIP GSM Gateway package, first unpack the box. In the Figure 2 you can see the box that you should get.
Figure 2 - Ozeki VoIP GSM Gateway package
The Figure 3 shows the opened package with its content.
Figure 3 - The opened box
After you have taken the accessories out of the box, you should check them. The Figure 4 shows what you can find in the box (from right):
In addition you can see a mini-SIM card (25.00 mm × 15.00 mm × 0.76 mm) that will be inserted into a SIM card slot (Figure 4 on the left).
Figure 4 - The contents of the package + a mini-SIM card
3. Connecting the DC Adapter and a SIM card to each other
After you have checked the content of the package, you need to connect the Ozeki GSM Gateway to a plug, to the computer network and you need to put one-four SIM card(s) into the device.
The Figure 5 shows the slots where the SIM cards and the DC adapter have to be plugged.
Figure 5 - DC adapter and SIM card slots 1 (SIM card out)
After you have inserted the SIM cards into the slots you need to push it while a click is not listened (Figure 6).
Figure 6 - DC adapter and SIM card slots 2 (SIM card in)
4. Connecting the Ozeki VoIP GSM Gateway to a computer
If the SIM card and DC adapter have been plugged, you need to connect the Ozeki GSM Gateway to a computer to set the IP address of the device.
To connect a gateway and a computer to each other you need to use a straight-through Ethernet cable (the yellow cable on Figure 7). One of the ends of the cable has to be plugged into the Ethernet port of the computer and the other has to be plugged into the PC port of the Ozeki VoIP GSM Gateway.
Figure 7 - Connecting the Ozeki VoIP GSM Gateway to a PC
Now you can configure the Ozeki VoIP GSM Gateway in a web browser.
By default the IP address of the gateway’s PC port is 192.168.8.1. To reach the graphical user interface of the device you need to set an IP address on the Ethernet port of the computer that is in the same network. The IP address of the PC can be from the range of 192.168.8.2 – 192.168.8.254.
5. Network settings in the Ozeki VoIP GSM Gateway
Open a web browser, such as Internet Explorer and enter http://192.168.8.1 in the address bar. Then the login page is popped up (Figure 8) to give the username in the User Name and password in the Password field (root username: admin; root password: admin).
Figure 8 - Login to Ozeki VoIP GSM Gateway
After you have clicked on the Ok button, the Status page will be loaded. To set the IP address of the gateway, click on the Configurations and Network links. The Figure 8 shows what you need to set on the LAN port:
Figure 9 - Network settings
Then click on the Save Changes and follow the below instructions:
Figure 10 - Connecting the gateway to the local computer network
After doing these settings, you can configure the Ozeki VoIP GSM Gateway from any computer in the same computer network. Just type the previously set IP address to the web browser, give the login data and you can configure it from anywhere.
6. SIM Card Settings in the Ozeki VoIP GSM Gateway
After you have inserted the SIM card into the device, you need to add the phone number and unlock code (PIN code).
Click on the Call Management link under the Configurations menupoint on the left side of the web page (Figure 11).
On the right side of the web page, find the SIM Card Parameters and click on it. On the loaded section, give the following data:
Figure 11 - SIM card settings
7. SIP Settings in the Ozeki VoIP GSM Gateway
To connect the Ozeki VoIP GSM Gateway to the Ozeki NG SMS Gateway, choose the VoIP menupoint from the menu on the left side (Figure 12).
On the right side of the page the configuration page will be loaded. You need to choose the Config by Line configuration mode, where you can connect every line (Line 1-4) to the Ozeki NG SMS Gateway by giving the following data:
Figure 12 - SIP Settings
After you have filled every texbox, click on the Save Changes button. If you use more than one SIM card, you need to set the Line 2, Line 3 or Line 4 as well.
If you have set the phone lines under the VoIP menupoint, you need to give the same values in the Ozeki NG SMS Gateway as well. For more information, see the chapter 8.
8. Dialing rules in the Ozeki VoIP GSM Gateway
The Ozeki VoIP GSM Gateway supports number dialing by rules. To use a dial plan, choose the Call Management option in the left menu (Figure 13).
Figure 13 - Call Management
In the Call OUT via GSM and Call IN via GSM sections you can set the followings:
Format of Dialing Rules
9. Settings in the Ozeki NG SMS Gateway
After you have set the Ozeki VoIP GSM Gateway, you need to add a Service Provide in the Ozeki NG SMS Gateway in order to connect the two devices to each other.
First start the Ozeki NG SMS Gateway and log in with your username and password (Figure 14).
Figure 14 - Ozeki NG SMS Gateway login page
Then click on Add button in Outside lines section (Figure 15).
Figure 15 - Add new service provider
Find the VoIP SIP Connection and click on it (Figure 16).
Figure 16 - VoIP SIP Connection
On the next page you need to enter the parameters for the previously installed Ozeki VoIP GSM Gateway on the configuration form. Please provide the followings under the Connection configuration page (Figure 17):
Figure 17 - General tab
Finally click on the OK button and the Ozeki NG SMS Gateway will be ready for making or receiving SMS messages through the Ozeki VoIP GSM Gateway.
10. Video tutorial about how to connect Ozeki VoIP GSM Gateway to Ozeki NG SMS Gateway
This guide demonstrated step-by-step how to setup Ozeki VoIP GSM Gateway for Ozeki NG SMS Gateway. If you follow these steps you will able to establish seamless connection between the GSM network and the IP network quickly and easily.
If you have any questions or need assistance, please contact us at firstname.lastname@example.org
Read more about Ozeki VoIP GSM Gateway:
How to setup for
Ozeki Phone System XE