|Ismerje meg, hogyan tudja beállítani és használni a legkorszerűbb mobil, VoIP, SMS és web funkciókat.|
This guide shows how you can connect Ozeki Phone System XE to your 3CX Phone System. This solution gives you a brief explanation about how you can configure Ozeki Phone System XE to start building your own application.
Ozeki Phone System XE uses Voice over IP to establish phone calls. Using VoIP technology is less expensive than traditional phone services. With Ozeki Phone System XE you can view your registered phone line, and your active phone calls. You can establish calls using Ozeki Phone System XE.
This configuration guide demonstrates how you can connect Ozeki Phone System XE to your 3CX Phone System.
If you follow the configuration guide, you will have a telephone system that works as follows: First, create an extension in your 3CX Phone System. Ozeki Phone System XE will connect using this created extension. Once Ozeki Phone System XE Studio is connected, you can start your calls. The destination phone could be a VoIP phone, a land line phone, or a mobile phone. You can see this process in Figure 1.
Figure 1 - Calling contacts via 3CX Phone System
Before you start to configure this solution it is assumed that you have already installed your 3CX Phone System, and downloaded Ozeki Phone System XE installer from the download page.
Install your 3rd party PBX on your computer or virtual machine. More important to realise that your PBX and Ozeki Phone System XE should be in the same local network. Start to install and add your local IP address which also use by default.
Figure 2 - Installing the 3CX Phone System
First of all, your 3CX Phone System needs to be configured. Click on Start menu, expand the 3CX Phone System folder, and click on Windows Management Console (Figure 3).
Figure 3 - Start Windows Management Console
Once it is started, enter as an administrator. Provide your user name and password in the respective fields (Figure 4).
Figure 4 - Login as administrator
After login, click on "Extensions" in the navigation menu, and click on "Add Extension" in the "Extensions" panel (Figure 5).
Figure 5 - Add extension
Fill the "Extension Number" field, provide an ID and a Password in the Authentication group (Figure 6).
Figure 6 - Create Extension
To save your settings, click on OK.
Figure 7 - Save settings
Now the configuration of 3CX Phone System is done, and you can configure Ozeki Phone System XE.
It is assumed that you have already downloaded Ozeki Phone System XE and installed it into you computer.
You will need to login to the Ozeki Phone System XE and install a VoIP provider. At the VoIP provider installation section you can set General, Network and Call options and you can select the audio and the video codecs of the calls.
You can reach the configuration of the VoIP service provider on the How to connect to VoIP service providers page.
If you have any questions or need assistance, please contact us at firstname.lastname@example.org
People who read this also read...